Tuesday, June 13, 2017

In Need of Some Polish: Conservation of a Late 19th C Shoe Polish Box

Sometimes when a museum curator is planning an exhibition, they discover that there are artifacts needed to tell a story that are not yet part of the overall collection. This box was acquired by the BSM for just such a reason.  It was purchased, along with its accompanying glass bottle containing remnants of black shoe polish, for our exhibition Fashion Victims: The Pleasures & Perils of Dress in the 19th Century.

As you can see from the photographs taken at the time of acquisition, the box was in poor condition. The paper wrapping covering the cardstock form was very dirty and had many losses. The corners of the box were torn and misshapen making it structurally unsound for display.





The paper was cleaned with cosmetic sponges and vinyl erasers to remove surface dirt. The box and its lid were gently humidified to reshape the distorted sides back into the intended shape. Holes in the torn paper wrapping were filled with a Kozo paper of similar weight. Kozo is made from the inner bark of the mulberry bush. The paper fills and torn corners were glued with wheat starch paste.






One side of the lid was missing some of its descriptive text. The gold ink drop shadow letters were recreated by photocopying an ‘R’, ‘H’, ‘E’ and ‘S’, cutting them around them with a scalpel, then gluing them on to the Kozo paper patch.





The box and bottle of shoe polish will be on display until the exhibition closes in April 2018.

Wednesday, April 19, 2017

Spotlight on Conservation: Gutskin Parka (Part 2)

Mounting the gutskin parka for the Arctic exhibition required some creativity. It is so light and translucent and we wanted to impart these features to museum guests. Putting the parka on a mannequin wouldn’t be suitable since the intestine when dry is brittle, making for a very stiff form.

We decided to use an acrylic support, displaying the parka in a vertical position as this would take up less space in the showcase than positioning it on a slanted, horizontal board. The solution to this conundrum needed to be strong yet invisible. 


The parka was placed on a table covered with brown paper; its outline was traced in pencil. The exhibit fabricators used this stencil to cut an acrylic support adding 15cm around the entire perimeter. A padded internal support for the hood was cut from polyethylene foam, then covered with polyester batting and encased in a poly cotton neutral coloured stretch knit. Once the exact location of the hood was determined, the covered support was hot melt glued to the acrylic. 

Encapsulated magnets
Rare earth magnets are used by museums to display posters and textiles. This seemed to be the perfect solution for holding the parka on the support. Four centimeter-wide cotton twill tape was used to encase the circular magnets, which were spaced every 15cm and held in place by stitching 2 layers of twill tape around each magnet. One magnetized tape was placed horizontally passing through both arms from wrist to wrist. Two magnetized tapes were placed vertically below the previous tape. The interior of the parka was stuffed with polyester tulle to provide support. 

Magnets placed horizontally through both arms




Come and see the final product - the parka on display -  in Art and Innovation: Traditional Arctic Footwear from the Bata Shoe Museum Collection, on now at the BSM!

Monday, April 3, 2017

Spotlight on Conservation: Gutskin Parka (Part I)

Unrolled parka
While it might not look like it at first glance, this rolled up bundle is a parka made and worn by Irene Davis of Nunivik Island, Alaska. The parka was slated for display in our Arctic-themed exhibition “Art and Innovation” but in order to assess its condition for display the parka had to be completely unrolled.

Partially unrolled parka


The parka is composed of bearded seal intestine decorated with tufts of red dyed dog hair inserted into the seams. The hair was dyed by laying it between layers of moistened red crepe paper. The string-sewn seams are reinforced with grass which prevents the stitches from tearing through the skin.

Intestines of sea mammals have been used in Alaska for centuries in the production of waterproof garments worn when hunting at sea in kayaks or, if highly decorated, for special occasions. After the viscera is removed from the carcass, the contents of the intestines are cleaned by washing and scraping. The length of intestine is then inflated and left outside to dry. When the gut is needed, it is sliced open, then sewn in strips either vertically or horizontally.

The unrolling of the parka was a gradual process. Each tuft of dog hair is encapsulated in a plastic pouch to prevent contact with water and the possibility of releasing the fugitive red dye. A very soft Japanese Hake brush (made with sheep hair bristles) is moistened with distilled water and applied to the surface of the gut. The wetted gut (although brittle when dry, it is quite strong when wet) is gently manipulated to ease out hard creases. Acid free tissue paper supports the gutskin as it dries. Once the parka was reshaped, tears and holes in the gutskin were patched with commercial sausage casing and an appropriate adhesive.

Tear in chest of parka

Tear in shoulder hood of parka